We have all had that one love when it comes to cars. For our owner that love has always been the Fox Body Mustang. This is one of the longest running body styles to date, from 1979 to 1993, a whopping 14 years! So now on to our story. This "Garage Built" project from BuyFoxBodyParts.com came about a few months ago when we were finally able to get to work on our Project '92 Vert which we now have dubbed the Weekend Cruiser(aka: The wife's car). We obtained this car from a small family run car lot in Indiana where when first seen looked like this car was a little worse for wear. The convertible top was not in the best of shape, the cloth seats were very faded but overall ok, and of course the carpet had seen its better days. We took this car for a test drive and were amazed at how good it road. A small problem we had noticed though while on the road test was that the transmission did not seem to have overdrive. Not a big deal to us because we have plans to swap it to a manual anyway.

With the purchase made, we drove the little convertible back home and let it sit in the garage to relax for a little while in its new home. We would take it out occasionally for a little weekend cruise through the back roads of Ohio visiting some of our friends and enjoying the good times.

After about 6 months, some of the transformations started to take place. We removed the anemic automatic transmission from behind the 2.3L 4-cylinder engine and prepped the car for its manual conversion. With a new clutch and flywheel sourced, and a spare clutch pedal assembly we had lying around, the swap commenced. We removed the knee panel cover and brace to gain access to all of the bolts to be able to drop down the steering column. With the steering column lowered to the floor and out of the way we removed the factory brake pedal assembly and installed a freshened clutch / brake pedal assembly. Installed a new BBK adjustable clutch cable and quadrant kit (Part # 15055) from BuyFoxBodyParts.com and got everything installed in an afternoon. We also turned our attention the the ragged out looking convertible top. We sought out the assistance from a local upholsterer in the Cincinnati area that did a great job making our little car look so much better. Now we could enjoy the car for a little while shifting the gears till the next phase came along. Well that next phase wouldn't happen for about a year, with a move across country that would pause the next upgrades for a little while.

Now that the move is complete, the faded cloth seats started to bug us a little bit. We contacted our friends at TMI and ordered a set of period correct vinyl upholstery and new front seat foam for the driver and passenger as well as new Crystal Blue Carpet. What an amazing improvement. The look of this car was really starting to transform.

With the convertible top and the interior complete for now, we needed to do a little more to the outside of the car so we turned our attention to the wheels. The rubber coated 14 inch wheels that Ford put on was just not going to cut it for the plan of this car and the 4-Lug hubs were a little dated as well. We needed an upgrade. On the front end of the car we wanted to do a couple of basic upgrades, but looking to the future we wanted to do a simple upgrade to start off this build, with bigger plans in the future that would make the next upgrade to the front brakes and suspension a little easier. With this in mind we installed a new set of Monroe Monro-matic Struts for basic street driving and ride comfort mated to a set of SN95 Front spindles and a pair of SN95 Front Lower Control Arms, with a pair of SN95 GT Calipers and Rotors for some improved stopping power. Next we moved to the rear of the car. With a plan to upgrade the rear axle in the not so distant future, we went with a common inexpensive upgrade to by doing an axle and drum swap. Using 2 right side axles from a ford ranger, and the rear drums we were able to retain the factory 7.5 inch rear housing and get the look we were after, and finished it all off with a set of factory 5-star wheels from a 2001 Mustang GT. So for now, the basic 5-Lug swap complete.

(March 2017) Now the real work begins. There has been a lot of planning over the past few years. We were at a bit of a break with our Convertible Weekend Cruiser Project with a lot going on and a new addition to our family. Now that family life has settled down , it is time to focus back on Project '92 Vert, our Garage Built Weekend Cruiser. We have got some big plans in store for this fun little ride. Now for the news that some may already know... Swap Time! 

Check out our next edition of "The Story Behind the Stang" where we check in and get some of the updates on the Garage Built Mustang known as The Weekend Cruiser.

#TheStoryBehindTheStang

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website BuyFoxBodyParts.com, you agree to our use of cookies. privacy policy
accept

Your cart

×